DL03-ISO 高压光隔离探头
DL-ISO 以最高的准确度、最佳的信号保真度和全面的连接性，使 GaN 和 SiC 器件表征具有最高的可信度。
产品性能特点
1 GHz 带宽
适用于 GaN 和 SiC 器件
1.5% 系统精度
435 ps 上升时间
高 CMRR - 160 dB
灵活的连接选项
无需断开即可自动归零
最高的精度
将 DL-ISO 探头与行业领先的 12-bit 高分辨率示波器 (HDO) 连接以获得 1.5% 的系统精度，几乎是市场上替代解决方案的两倍。
最佳的信号保真度
DL-ISO 以最快的上升时间、最低的过冲和低 DUT 负载提供业界最佳的信号保真度。
全面的连接
DL-ISO 探头采用高质量同轴衰减尖端，可抑制不需要的噪声，并使用行业标准 MMCX 连接器或高压安全方形排针端接至测试板。
灵活的在线调试
Device-Power 软件自动计算 JEDEC 定义的各种器件损耗®.
Bandwidth | DL03-ISO: 350 MHz | DL07-ISO: 700 MHz | DL10-ISO: 1 GHz |
Rise Time (10-90%) | DL03-ISO: 1.1 ns | DL07-ISO: 575 ps | DL10-ISO: 435 ps |
Differential Voltage Range (Pk to Pk) | 2 V to 2500 V with different attenuating tips | ||
Common Mode Voltage Range | ±60 kV (DC+Peak AC) (not for hand-held use, must maintain adequate spacing between probe components & earth ground) | ||
Maximum Input Voltage to Earth | ±60 kV (DC+Peak AC) (not for hand-held use, must maintain adequate spacing between probe components & earth ground) | ||
Maximum Non-destruct Voltage (DC+Peak AC) | DL-ISO-2V-TIP: 50 V DL-ISO-40V-TIP: 250 V DL-ISO-1000V-TIP: 1,250 V | DL-ISO-10V-TIP: 100 V DL-ISO-200V-TIP: 300 V DL-ISO-2500V-TIP: 3,300 V | |
Sensitivity | DL-ISO-2V-TIP: 20 mV/div to 250 mV/div DL-ISO-40V-TIP: 400 mV/div to 5 V/div DL-ISO-1000V-TIP: 10 V/div to 125 V/div | DL-ISO-10V-TIP: 100 mV/div to 1.3 V/div DL-ISO-200V-TIP: 2 V/div to 25 V/div DL-ISO-2500V-TIP: 25 V/div to 320 V/div | |
DC Gain Accuracy | 1.5% (after Precision Gain Calibration) | ||
DC Gain Drift | < 1 %/°C | ||
Offset | DL-ISO-2V-TIP: ±25 V DL-ISO-40V-TIP: ±150 V DL-ISO-1000V-TIP: ±1000 V | DL-ISO-10V-TIP: ±50 V DL-ISO-200V-TIP: ±150 V DL-ISO-2500V-TIP: ±2500 V | |
Input Impedance | DL-ISO-2V-TIP: 200 kΩ || 3.6 pF DL-ISO-40V-TIP: 1 MΩ || 2.1 pF DL-ISO-1000V-TIP: 8 MΩ || 1.5 pF | DL-ISO-10V-TIP: 1 MΩ || 2.1 pF DL-ISO-200V-TIP: 7.5 MΩ || 2 pF DL-ISO-2500V-TIP: 15 MΩ || 2.1 pF | |
Output Termination | 50 Ω | ||
Input/Output Coupling | DC only | ||
Interface | ProBus | ||
Cable Length | 3.375 m (11 feet) from probe tip to oscilloscope connection | ||
Electrostatic Discharge (ESD) Immunity | 8 kV contact discharge and 10 kV air discharge per IEC61000-4-2, criteria A | ||
Radiated RF Electromagnetic Field Immunity | Up to 25 V/m (80 MHz to 2.7 GHz) per IEC61000-4-3, criteria A when operating in standard configuration | ||
Immunity to Conducted Disturbance Induced by RF Fields | Up to 10 V (150 kHz to 80 MHz) per IEC61000-4-6, criteria A when operating in standard configuration | ||
Environmental | |||
Temperature | 5°C to 40°C (operating in standard configuration), -20°C to 70°C (non-operating) | ||
Humidity | 5% to 95% RH (non-condensing), 75% RH above 30°C, 45% RH above 40°C | ||
Altitude | Up to 3000 m (operating), 10,000 m (non-operating) | ||
Pollution Degree | 2, Indoor Use Only | ||
Certifications | |||
CE Declaration of Conformity | Low Voltage Directive 2014/35/EU (IEC/EN 61010-1:2010+A1:2019; IEC/EN 61010-2-030:2021) EMC Directive 2014/30/EU (IEC/EN 61326-1:2013; IEC/EN 61326-2-1:2013) RoHS2 Directive 2011/65/EU (IEC/EN 63000:2018) | ||
Laser Product certifications | IEC/EN 60825-1:2014; US 21CFR Part 1010; US 21CFR Part 1040 | ||
DL-ISO-2V-TIP | 1 GHz | 700 MHz | 350 MHz |
50 mV/div | 1.98 mVrms | 1.78 mVrms | 1.12 mVrms |
100 mV/div | 3.37 mVrms | 3.00 mVrms | 2.25 mVrms |
200 mV/div | 9.22 mVrms | 7.12 mVrms | 4.49 mVrms |
Probe Tip | DC | 1 MHz | 100 MHz | 200 MHz | 500 MHz | 1 GHz |
DL-ISO-2V-TIP | 160 dB | 110 dB | 90 dB | 90 dB | 80 dB | 75 dB |
DL-ISO-10V-TIP | 160 dB | 100 dB | 75 dB | 75 dB | 65 dB | 65 dB |
DL-ISO-40V-TIP | 150 dB | 100 dB | 70 dB | 60 dB | 60 dB | 50 dB |
DL-ISO-200V-TIP | 140 dB | 95 dB | 55 dB | 50 dB | 45 dB | 35 dB |
DL-ISO-1000V-TIP | 125 dB | 85 dB | 30 dB | 35 dB | 25 dB | 20 dB |
DL-ISO-2500V-TIP | 115 dB | 80 dB | 25 dB | 30 dB | 25 dB | 15 dB |
